Select the check box to notify a device management software of the power status of the machine. When
[Notify] is selected, you can expect the machine to avoid unnecessary communication during sleep mode
and reduce the total power consumption.
Change the port number for this function according to the network environment.
[Number of Routers to Traverse]
Specify how many routers the notification packets can pass. Enter a number from 0 to 254.
Specify how often the machine notifies a device management software of its power status. Enter a
number in seconds from 60 to 65535.
Perform a hard reset.
Click [Device Control], select [Hard Reset], and then click [Execute].
The settings are enabled after the hard reset is performed.
Using the operation panel
You can also enable or disable discovery response from the setting menu of the operation panel.
Discovery Response(P. 379)
Power status notification settings can also be accessed from the setting menu of the operation panel.
Sleep Notif. Set.(P. 379)