Setting a Remote UI PIN
You can set a PIN for access to the Remote UI. All users use a common PIN.
●
When Department ID Management is enabled, setting here is not required.
Management(P. 249)
1
Press
(
2
Use
/
to select <Network>, and press
●
When a message appears, press
3
Select <Remote UI Settings>
4
Select <On>, and press
5
Set a PIN.
●
Enter up to 7 digits and press
●
As <Confirm PIN> is displayed for confirmation, enter again the same PIN digits.
If Remote UI settings are initialized
●
The Remote UI Access PIN is also initialized. After an initialization, reset the PIN.
LINKS
Setting Access Privileges(P. 245)
Setting the System Manager Password(P. 246)
).
.
<RUI Access Sec. Set.>.
.
.
Security
.
256
167A-043
Setting the Department ID
Initializing Menu(P. 540)