Settings marked with an asterisk (
ROM is installed on the machine.
Paper Save(P. 416)
Font Number(P. 417)
Point Size(P. 417)
Form Lines(P. 417)
Character Code(P. 418)
Custom Size(P. 419)
Specifies whether the machine outputs the blank page that can be created due to no data existing between two form
feed codes sent from an application.
Enables you to set the paper orientation.
Setting Menu List
All the settings about the PCL control commands are listed with short descriptions.
Default settings are marked with a dagger ( ).
) are not displayed depending on other settings or whether the optional
Unit of Measurement(P. 419)
X Dimension(P. 419)
Y Dimension(P. 420)
Append CR to LF(P. 420)
Enlarge A4 Prt Width(P. 420)
<Off> or <On>
<Portrait> or <Landscape>