Starting Remote Ui - Canon imageCLASS MF746Cdw User Manual

Starting Remote UI

To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.
Check the IP address set to the machine in advance (
ask your Network Administrator.
When the Department ID Management is disabled
● To log in to the Remote UI, you need to set a Remote UI Access PIN on the machine beforehand.
Remote UI PIN(P. 371)
When logging in to System Manager Mode (MF746Cdw / MF745Cdw)
● To log in to System Manager Mode (System Manager ID), you first need to change the System Manager PIN
from the default setting.
1
Start the Web browser.
2
Enter "http://<the IP address of the machine>/" in the address field, and press the
[ENTER] key.
● If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://
[fe80::2e9e:fcff:fe4e:dbce]/).
If a security alert is displayed
● A security alert may be displayed when the Remote UI communication is encrypted (
Key and Certificate for TLS(P. 389) ). When certificate settings or TLS settings have no errors, continue
browsing the Web site.
3
Log in to the Remote UI.
When the Department ID Management is disabled
Select [System Manager Mode] or [General User Mode], and enter a value in [Remote UI Access PIN] as
necessary.
Managing the Machine
Viewing Network Settings(P. 40) ). If you have any questions,
Setting the System Manager ID and PIN(P. 363)
428
3S1Y-084
Setting a
Configuring the