Checking that the SD Card Is Properly Installed on the Machine
Configuration Page(P. 525) , and the SD card is installed properly if
"SD Card" in "Control Menu" is "On."
If no SD card status information is indicated
The SD card is not installed properly. Remove the SD card from the
machine, and remount it.
Configuring the Information of the SD Card
If an SD card was added after the printer driver was installed, you need to configure the SD card information in the
Optional Items(P. 563)
Deleting All Data in an SD Card
Before disposing of an SD card, you can use the procedure below to delete all data in the card. The procedure deletes
even those fragments of data that cannot be deleted normally. This eliminates the risk of your data being red by third
parties, thus you can dispose of the SD card safely.
For any SD cards other than the optional "SD CARD-C1", the procedure below cannot be used.
Set the machine to offline.
to select <User Maintenance>, and press
Proceed with <SD Card Maintenance>
When a message appears, press
) is lit, press
<Completely Del. Data> in this order.