Table of Contents
Advertisement
➠
The settings are enabled after the hard reset is performed.
Using the operation panel
●
You can also enable or disable LPD print, RAW print, and IPP print from the setting menu of the operation
panel.
LPD Settings(P. 374)
RAW Settings(P. 374)
IPP Print(P. 375)
●
WSD settings can also be accessed from the setting menu of the operation panel.
Setup procedures on your computer
After the setting in the machine is completed, you may need to configure settings or install applications on your
computer as well. Configure settings in your computer as necessary.
●
Configuring printer ports
Printing errors can occur when the IP address of the machine has been changed, or when a printer has been
added via the Windows printer folder. These errors are typically caused by incorrect printer port settings. For
example, an incorrect port number or port type may have been specified in the computer. In this case, you
need to configure the printer port settings. For more information, see the description of the procedure for
changing the standard TCP/IP port in the manuals for the relevant drivers on the online manual website.
●
Setting up WSD network devices on Windows Vista/7/8/10
Use the WSD port to install the printer driver. For more information, see the manuals for the relevant drivers
on the online manual website.
●
Enabling IPP/IPPS
Install the printer drivers by specifying the IPP port.
LINKS
Setting Up Print Server(P. 205)
Network
Enabling IPP/IPPS(P. 199)
198
WSD(P. 375)
Advertisement
Table of Contents
