Starting Remote Ui - Canon imageCLASS MF242dw User Manual

Starting Remote UI

To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.
Check the IP address set to the machine in advance (
questions, ask your Network Administrator.
● To log on to the Remote UI, you must set a Remote UI Access PIN on the machine beforehand.
Remote UI PIN (P. 228)
1
Start the Web browser.
2
Enter "http://(the IP address of the machine)/" in the address field, and press the
[ENTER] key.
● If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://
[fe80::2e9e:fcff:fe4e:dbce]/).
If a security alert is displayed
● A security alert may be displayed if communication with an Apple device is encrypted (
Encrypted Communication for the Remote UI(P. 245) ). When certificate settings or TLS settings have no
errors, continue browsing the Web site.
● A security alert may be displayed when the Remote UI communication is encrypted (
Encrypted Communication for the Remote UI(P. 245) ). When certificate settings or TLS settings have no
errors, continue browsing the website.
3
Log on to the Remote UI.
Select [System Manager Mode] or [General User Mode], and then enter the appropriate PIN in [Remote UI
Access PIN] as necessary.
[System Manager Mode]
You can perform all the Remote UI operations and settings. If a System Manager PIN is set, enter the PIN
in [System Manager PIN].
Using Remote UI
Viewing Network Settings(P. 191) ). If you have any
Setting the System Manager PIN(P. 226)
269
1525-054
Setting a
Enabling TLS
Enabling TLS