In the example shown below, to shift the print position 5 mm upward and 1.7 mm rightward, "-5.0 mm" is set in
<Offset Y> and "+1.70 mm" is set in <Offset X>.
Step 3: Adjusting the Print Position for Each Paper Source
After you confirm the direction and distance to adjust, specify an adjusted print position. You can adjust the print
position in the range of -5.0 to +5.0 mm in 0.1 mm increments in either direction: vertical and horizontal.
Set the machine to offline.
to select <User Maintenance>, and press
Select <Adj. Print Position>, and press
Select the paper source, and press
) is lit, press