Table of Contents
Advertisement
●
When you press
Cannot store.
The SD card is set to <Off>.
●
Set <SD Card> to <On>, and send the print data again.
SD Card(P. 362)
The upper limit on the volume of data that can be stored on the SD card has been exceeded.
●
A maximum of 1000 data items can be stored in the machine. Delete unnecessary stored data.
Deleting a Document Stored in the Machine(P. 137)
Free space of the SD card is insufficient.
●
The SD card can store up to 3 GB of data in total. Delete unnecessary stored data.
An incorrect box number has been specified.
●
Specify the correct box number.
Storing a Document in the Machine(P. 133)
●
When you press
Cannot verify.
A department ID authentication error has occurred.
●
Specify the correct department ID and password, and print the file again.
●
If the print data does not support the department ID management, specify the setting to permit printing
with an unknown department ID, and print the file again.
Blocking Jobs When Department ID Is Unknown(P. 254)
●
When you press
Check paper size.
The paper loaded in the paper source does not match the specified paper size.
●
Specify the paper size correctly.
Specifying Paper Size and Type in the Paper Drawer(P. 58)
Specifying Paper Size and Type in the Multi-Purpose Tray(P. 60)
Basic Printing Operations(P. 73)
When the paper size was set to <Free Size>, printing has been attempted with the custom size paper of
which long edge is 215.9 mm or less loaded in portrait orientation (only during use of the UFR II printer
driver).
Troubleshooting
(
), the print job is canceled.
(
), the print job is canceled.
(
), the print job is canceled.
473
Advertisement
Table of Contents
