Table of Contents
Advertisement
(
<On>
Receive in Parallel
Specifies whether to print jobs in the order received when print data for several jobs are sent to the printer from one
computer.
Off
On
(
or <On>
Wait Time at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Wait Time for Connecting to a Network(P. 212)
0
to 300 (sec.)
Remote UI Settings
Specify settings for using the Remote UI. You can use the Remote UI to specify settings for the machine from a Web
browser.
Remote UI
Enable or disable the Remote UI.
Off
On
RUI Access Sec. Set.
Select whether to use a PIN to access the Remote UI.
Off
On
*
TLS
Enable or disable TLS for Remote UI communications. To use TLS for encrypted communications, you need to
set key pairs by using the Remote UI (
Off
Setting Menu List
)
<Network>
Check the message
Perform a hard reset (
)
<Network>
Check the message
Perform a hard reset (
Disabling Remote UI(P. 282)
Using TLS for Encrypted Communications(P. 287) ), respectively.
Performing a Hard Reset(P. 448) )
Performing a Hard Reset(P. 448) )
Setting a Remote UI PIN(P. 256)
384
<Spooler>
<Off> or
<Receive in Parallel>
<Off>
Setting a
Advertisement
Table of Contents
