Starting Remote Ui - Canon imageCLASS LBP122dw User Manual

Starting Remote UI

To use Remote UI, enter the IP address of the machine into a Web browser on a computer, and log in with System
Manager Mode or General User Mode. The functions available with Remote UI vary depending on the mode you
logged in to.
Required Preparations
● Check the operating environment of Remote UI.
● Connect the computer you are using to operate Remote UI to the machine over a network.
Network(P. 34)
● Check the IP address of the machine.
When Logging in with System Manager Mode
● To log in with System Manager Mode (System Manager ID), you must first change the System Manager PIN
from the default setting.
1
From a Web browser on a computer, access the following URL.
http://<IP address of the machine>/
➠
The Remote UI login screen appears.
When Remote UI communication is encrypted, a warning message about the security certificate may
appear. If there are no problems with the certificate or TLS settings, you can continue operations.
When entering an IPv6 address, enclose the IP address in brackets [ ].
Example:
http://[fe80:2e9e:fcff:fe4e:dbce]/
If the Remote UI Login Screen Is Not Displayed
When a message such as [Cannot access Remote UI.] is displayed and the login screen is not displayed, see
the following:
Cannot Access Remote UI(P. 321)
2
Select [System Manager Mode] or [General User Mode], and enter the items required
for login.
Managing the Machine
Supported Environment(P. 25)
Checking the Network Status and Settings(P. 66)
Setting the Department ID and PIN for the Administrator(P. 144)
179
94RC-067
Setting Up the