You can restore the settings of the machine (
Do not press the power switch when the initialization is in progress
If the machine is turned OFF during the initialization, it may be damaged.
If a Remote UI Access PIN has been specified
The Remote UI Access PIN is also initialized. After performing initialization, respecify a Remote UI Access
Setting a Remote UI PIN(P. 256)
When you want to initialize the network settings, follow the procedure in
Settings(P. 541) .
When you want to initialize the settings in <Adj. Print Position>, follow the procedure in
Position(P. 400) .
Hard Reset(P. 448) )
Setup Menu(P. 354) ) to the factory default settings.
Perform a hard reset (
Initializing the Network