Table of Contents
Advertisement
Network
If <Network> is not displayed
●
If <Network> under <Interface Selection> is set to <Off>, <Network> is not displayed in the Setup menu.
Interface Selection(P. 397)
Asterisks (*)
●
Settings marked with an asterisk (
SD card is installed on the machine.
TCP/IP Settings(P. 369)
Mopria(P. 380)
Google Cloud Print(P. 381)
SMB(P. 381)
SNMP Settings(P. 382)
Spooler(P. 383)
Receive in Parallel(P. 384)
Wait Time at Startup(P. 384)
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4 Settings
Specify settings for using the machine in an IPv4 network.
IPv4
Enable or disable IPv4 in the machine.
Off
On
(
Settings>
Hard Reset(P. 448) )
Setting Menu List
All the settings about the network are listed with short descriptions. Default settings
are marked with a dagger ( ).
*
) are not displayed depending on other settings or whether an optional
Remote UI Settings(P. 384)
Ethernet Driver(P. 385)
Sleep Mode Priority(P. 385)
IEEE802.1X(P. 386)
Address Filter(P. 386)
MAC Address(P. 387)
E-Mail Print Set.(P. 387)
Monitoring Service(P. 388)
Init. Network Set.(P. 388)
)
<Network>
Check the message
<IPv4>
<Off> or <On>
Perform a hard reset (
369
<TCP/IP Settings>
Performing a
167A-05F
<IPv4
Advertisement
Table of Contents
