Remove A Drive Filler Panel - Oracle SPARC T5-2 Service Manual

Remove a Drive Filler Panel

a. Push the release button to open the latch.
b. Unlock the drive by moving the latch to the right.
c. Grasp the latch and pull the drive out of the slot.
Caution -
the server might overheat due to improper airflow.
8. Install a replacement drive or a drive filler panel.
See "Install a Drive" on page 76
Related Information
"Install a Drive" on page 76
■
"Remove a Drive Filler Panel" on page 74
■
"Install a Drive Filler Panel" on page 77
■
"Verify Drive Functionality" on page 78
■
Remove a Drive Filler Panel
A customer can perform this procedure while the server is running. See
Categories" on page 57
1. Attach an antistatic wrist strap.
74 SPARC T5-2 Server Service Manual • February 2017
When you remove a drive, replace it with a filler panel or another drive. Otherwise,
or
for more information about hot-service procedures.
"Install a Drive Filler Panel" on page 77.
"Component Service