Oracle SPARC T5-2 Service Manual page 94

Install a Power Supply
5. Move the release latch up to secure the power supply in place.
6. Reconnect the power cord to the power supply.
7. Verify that the AC OK LED is lit.
See "Locate a Faulty Power Supply" on page
8. Verify that the following LEDs are not lit:
Service Action Required LED on the power supply
■
Front and rear Service Action Required LEDs
■
Rear PS Failure LED on the bezel of the server
■
See "Interpreting LEDs" on page
9. Verify power supply functionality.
See "Verify Power Supply Functionality" on page
Related Information
"Remove a Power Supply" on page 91
■
"Verify Power Supply Functionality" on page 95
■
94 SPARC T5-2 Server Service Manual • February 2017
91.
36.
95.