Oracle SPARC T5-2 Service Manual page 47

1. Log in to Oracle ILOM.
See "Log In to Oracle ILOM (Service)" on page
2. Check for PSH-diagnosed faults.
This example shows how to check for faults through the Oracle ILOM fault management shell.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
faultmgmtsp> fmadm faulty
------------------- ------------------------------------ -------------- -------
Time UUID
------------------- ------------------------------------ -------------- -------
2012-08-27/19:46:26 4ec16c8d-5cdb-c6ca-c949-e24d3637ef27 PCIEX-8000-8R Major
Problem Status : solved
Diag Engine : [unknown]
System
Manufacturer : Oracle Corporation
Name : SPARC T5-8
Part_Number : 12345678+11+1
Serial_Number : 1238BDC0DF
----------------------------------------
Suspect 1 of 1
Fault class : fault.io.pciex.device-interr-corr
Certainty : 100%
Affects : hc:///chassis=0/motherboard=0/cpuboard=0/chip=0/hostbridge=0/
pciexrc=0
Status : faulted but still in service
FRU
Status : faulty
Location : /SYS/PM0
Manufacturer
Name
Part_Number
Revision
Serial_Number
Chassis
Manufacturer
Name
Part_Number
Serial_Number : 1248DC140
Description : A fault has been diagnosed by the Host Operation System.
: Oracle Corporation
: TLA,PN,NRM,T5 1.2
: 7061001
: 01
: 465769T+12445102WR
: Oracle Corporation
: SPARC T5-8
: 12345678+13+2
35.
msgid Severity
Detecting and Managing Faults
Check for Faults
47