Attachment Of Devices During Service; Related Information - Oracle SPARC T5-2 Service Manual

Attachment of Devices During Service

Related Information

"Replace the Top Cover" on page 169
■
Attachment of Devices During Service
During service procedures, you might have to connect devices to the server.
For OS support, connect an Ethernet cable to the one of the Ethernet connectors (NET 0,
■
NET 1, NET 2, and NET 3).
If you plan to interact with the system console directly, you can connect additional external
■
devices, such as a mouse and keyboard, to the server's USB connectors, and connect a
monitor to a HD-15 video connector. The rear HD-15 video connector is active by default.
For more details on selecting an active video port, refer to Server Installation.
If you plan to connect to the Oracle ILOM software over the network, connect an Ethernet
■
cable to the Ethernet port labeled NET MGT.
Note -
can configure the SP to share one of the sever's four Ethernet ports instead. The SP uses
only the configured Ethernet port.
If you plan to access the Oracle ILOM CLI through the management port, connect a serial
■
null modem cable to the RJ-45 serial port labeled SER MGT.
The USB connectors on the front panel support USB 2.0. The USB connectors on the rear
■
panel support USB 3.0.
Related Information
"Front Panel Components (Service)" on page 13
■
"Rear Panel Components (Service)" on page 15
■
"Detecting and Managing Faults" on page 31
■
Server Installation
■
68 SPARC T5-2 Server Service Manual • February 2017
The service processor (SP) uses the NET MGT (out-of-band) port by default. You