Accessing Server Components; Prevent Esd Damage - Oracle SPARC T5-2 Service Manual

Accessing Server Components

Related Information
"Power Off the Server (Oracle ILOM)" on page 60
■
"Power Off the Server (Power Button - Graceful)" on page 60
■
"Power Off the Server (Emergency Shutdown)" on page 61
■
"Rear Panel Components (Service)" on page 15
■
Related Information
"Safety Information" on page 53
■
Accessing Server Components
These topics explain how to access components on the outside and the inside of the server.
Perform these tasks in this order, as needed.
"Prevent ESD Damage" on page 62
■
"Extend the Server to the Service Position" on page 63
■
"Release the CMA" on page 64
■
"Remove the Server From the Rack" on page 66
■
"Remove the Top Cover" on page 67
■
Related Information
"Safety Information" on page 53
■

Prevent ESD Damage

Many components housed within the chassis can be damaged by ESD. To protect these
components from damage, perform the following steps before opening the chassis for service.
1. Prepare an antistatic surface to set parts on during the removal or installation
process.
Place ESD-sensitive components such as the printed circuit boards on an antistatic mat. The
following items can be used as an antistatic mat:
Antistatic bag used to wrap a replacement part
■
62 SPARC T5-2 Server Service Manual • February 2017