Verify Drive Functionality - Oracle SPARC T5-2 Service Manual
Hide thumbs
Also See for SPARC T5-2:
- Getting started manual (6 pages) ,
- Getting started manual (7 pages)
Table of Contents
Advertisement
Verify Drive Functionality
3.
Install the drive by completing the following tasks.
a.
Slide the drive filler panel into the drive slot until it is fully seated.
Close the latch to lock the filler panel in place.
b.
Related Information
"Locate a Faulty Drive" on page 71
■
"Remove a Drive" on page 71
■
"Install a Drive" on page 76
■
"Remove a Drive Filler Panel" on page 74
■
"Verify Drive Functionality" on page 78
■
Verify Drive Functionality
1.
If the OS is shut down, and the drive you replaced was not the boot device, boot
the OS.
Depending on the nature of the replaced drive, you might need to perform administrative tasks
to reinstall software before the server can boot. Refer to the Oracle Solaris OS administration
documentation for more information.
78
SPARC T5-2 Server Service Manual • February 2017
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T5-2 and is the answer not in the manual?
Questions and answers