Oracle SPARC T5-2 Service Manual page 138
Hide thumbs
Also See for SPARC T5-2:
- Getting started manual (6 pages) ,
- Getting started manual (6 pages)
Table of Contents
Advertisement
Install the Fan Board
4.
Reinstall the fan board.
a.
Insert the fan board into the chassis, moving it down and toward the front
(panel 1).
b.
Reposition the front memory riser guide, routing the fan board and power
cable through the riser guide (panels 2 and 3).
c.
Plug the fan board cable and power cable into the connectors on the
motherboard (panel 3).
d.
Secure the fan board by reinserting and tightening the two screws on each
side of the outside of the chassis (panel 3).
e.
Tighten the three captive screws to hold the front memory riser guide in
place (panel 4).
138
SPARC T5-2 Server Service Manual • February 2017
Advertisement
Table of Contents
