Front Panel Controls And Leds - Oracle SPARC T5-2 Service Manual

"Managing Faults" on page 46
■

Front Panel Controls and LEDs

No. LED
1 Locator LED and
button
(white)
2 Service Required
LED
(amber)
3 Power OK LED
(green)
Icon or Label Description
You can turn on the Locator LED to identify a particular server. When lit, the LED blinks
rapidly. Turn on the Locator LED by pressing the Locator button, or see
Server" on page
The fmadm faulty command provides details about any faults that cause this indicator to
light. See "Check for Faults" on page
Under some fault conditions, individual component fault LEDs are lit in addition to the
Service Required LED.
Indicates these conditions:
■ Off – Server is not running in its normal state. Server power might be off. The SP
might be running.
■ Steady on – Server is powered on and is running in its normal operating state. No
service actions are required.
■ Fast blink – Server is running in standby mode and can be quickly returned to full
function.
■ Slow blink – A normal but transitory activity is taking place. Slow blinking might
indicate that server diagnostics are running or that the server is booting.
57.
46.
Interpreting LEDs
"Locate the
Detecting and Managing Faults 37