Oracle SPARC T5-2 Service Manual page 73

The cold-service procedure is required if the drive has one of these characteristics:
Contains the operating system, and the operating system is not mirrored on
■
another drive.
Cannot be logically isolated from the online operations of the server.
■
4. Take one of the following actions:
To cold-service the drive, power off the server. Complete one of the
■
procedures described in
To hot-service the drive, take the drive offline using one of the procedures
■
in "Power Off the Server (Power Button - Graceful)" on page
action removes the logical software links to the drive and prevents any
applications from accessing it.
5. If you are hot-servicing the drive, locate the drive that displays the amber Fault
LED and ensure that the blue Ready-to-Remove LED is lit.
6. Attach an antistatic wrist strap.
7. On the drive you want to remove, complete the following tasks.
The latch is not an ejector. Do not bend it too far to the right. Doing so can damage
Caution -
the latch.
"Removing Power From the Server" on page
Remove a Drive
58.
60. This
Servicing Drives 73