Oracle SPARC T5-2 Service Manual page 75

2. On the drive filler panel you want to remove, complete the following tasks.
The latch is not an ejector. Do not bend it too far to the right. Doing so can damage
Caution -
the latch.
Push the release button to open the latch and unlock the drive filler panel by
a.
moving the latch to the right.
b. Grasp the latch and pull the filler panel out of the drive slot.
When you remove a drive filler panel, replace it with another filler panel or a drive.
Caution -
Otherwise, the server might overheat due to improper airflow.
Install a drive or a replacement drive filler panel.
3.
See "Install a Drive Filler Panel" on page 77
Related Information
"Locate a Faulty Drive" on page 71
■
"Remove a Drive" on page 71
■
"Install a Drive" on page 76
■
"Install a Drive Filler Panel" on page 77
■
"Verify Drive Functionality" on page 78
■
or "Install a Drive" on page
Remove a Drive Filler Panel
76.
Servicing Drives 75