1. Manuals
  2. Brands
  3. QMS Manuals
  4. Printer
  5. 1660
  6. Getting started

QMS 1660 Getting Started

Print system
Hide thumbs Also See for 1660:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Operation
QMS 1660
®
Print System

Getting Started

1800356-001B

Advertisement

Table of Contents
loading

Related Manuals for QMS 1660

Summary of Contents for QMS 1660

  • Page 1: Getting Started

    QMS 1660 ® Print System Getting Started 1800356-001B...

  • Page 2: Proprietary Statement

    Copyrighted © 1995 by QMS, Inc. All Rights Reserved. This software may not be reproduced, modified, displayed, transferred, or copied in any form or in any manner or on any media, in whole or in part, without the express written permission of QMS, Inc. Copyright Notice This manual is Copyrighted ©...

  • Page 3: Dear Customer

    Easy on, easy off. We think you'll find the blue color especially useful since you’ll have more than one manual in the binder. We hope you enjoy your new QMS printer (and traveling through its manuals, too!) Your QMS Technical Writer...

  • Page 5: Table Of Contents

    Related Documentation 1-5 About This Manual ............... 1-5 Typographic Conventions 1-6 Printer Features ................1-7 Media Flexibility 1-7 Multiple Resolutions 1-7 Toner Savings 1-8 Three Standard Interfaces 1-8 Four Resident Emulations 1-8 Resident Fonts and Symbol Sets 1-10 QMS Crown Technology 1-10...
  • Page 6 Installing Options ..............2-17 What's Next? ................2-17 Connecting to a Macintosh Introduction .................. 3-2 Before Making the Connection ........... 3-3 What You Need 3-3 Making the Connection ............... 3-3 Macintosh Printing Software ............3-5 QMS 1660 Print System Getting Started...
  • Page 7 Installing PS Executive Series Printer Utilities 3-5 Printing from the Macintosh .............3-10 A Note for Users of "Aldus" Applications 3-10 A Note for Users of Adobe PhotoShop 3-10 What's Next? ................3-10 Connecting to a PC Introduction .................. 4-2 Before Making the Connection ........... 4-2 What You Need 4-2 Making the Connection ..............
  • Page 8 QMS Customer Support Sources of Support ..............A-2 Your QMS Vendor A-2 Your Application Vendor A-2 Q-FAX A-2 The QMS Corporate Bulletin Board System A-3 CompuServe A-3 Internet A-3 QMS Customer Response Center (CRC) A-4 QMS National Service A-4 QMS World-wide Offices .............A-5...

  • Page 9: Introduction

    Introduction In This Chapter... About the printer About the documentation About this manual Printer features and user benefits...

  • Page 10: About The Printer

    About the Printer About the Printer The QMS 1660 Print System offers the unique QMS Crown multitasking operating system, superior performance, extensive connectivity, upgrade options, and flexible emulation support. It prints 16 letter/A4-size pages per minute; uses media up to 11.70"x19.50"/ 297.18x495.30 mm in size;...

  • Page 11: Standard Product Documentation

    About the Documentation Standard Product Documentation The following documentation is shipped with your printer: & QMS 1660 Print You're looking at this manual right now. System Getting It contains detailed, illustrated Started instructions to guide you as you unpack and set up your printer and connect it to an Apple Macintosh or an IBM or compatible PC.

  • Page 12: Optional Documentation

    See chapter 6, “Printer Options,” of the QMS 1660 Print System Reference for additional option information. Optional Documentation The following manual, available from your QMS vendor, may also be useful: QMS Crown Document Document Option Commands (DOCs) Option Commands...

  • Page 13: Related Documentation

    About This Manual This manual provides detailed information on how to set up your QMS 1660 Print System and how to use the control panel. It is divided into the following sections: Provides an overview of the...

  • Page 14: Typographic Conventions

    Warnings indicate the possibility of personal injury if a specific procedure is not performed exactly as described in the manual. ACHTUNG! Bitte halten Sie sich exakt an die im Handbuch beschriebene Vorgehensweise, da sonst Verletzungsgefahr bestehen könnte. QMS 1660 Print System Getting Started...

  • Page 15: Printer Features

    Printer Features Printer Features This brief overview will acquaint you with your printer’s major features and how they can benefit you. Specific chapters throughout this man- ual, the operation manual, and the reference manual contain more information on each feature. Consult the index or the table of contents in each manual for guidance in locating this information.

  • Page 16: Toner Savings

    HP PCL 5 Emulation The printer simultaneously emulates a Hewlett-Packard LaserJet IIISi and an HP PaintJet XL300 Color Printer (the output is gray-scaled on your QMS 1660). PCL 5 files print at both 300x300 dpi (bitmap and QMS 1660 Print System Getting Started...
  • Page 17 PostScript Level 2 Emulation and Level 1 Compatibility The QMS 1660 Print System’s Level 2 emulation allows you to take full advantage of your printer's high print resolution (up to 1200x600 dpi). The Level 2 emulation is compatible with Adobe's PostScript Level 2 language while providing additional capabilities.

  • Page 18: Resident Fonts And Symbol Sets

    Compile-Ahead Technology and True Multitasking Compile-ahead technology keeps all of the QMS 1660’s printing resources busy to improve throughput. While the engine is printing a page, compile-ahead technology uses available printer memory to prepare the subsequent pages of the document (or the next job).

  • Page 19: Context Switching

    Although many other printers have multiple interface ports and auto- matically designate a “hot port,” only one port actively receives data at a time. Your QMS 1660 Print System is unique because SIO allows all of its interface ports—LocalTalk, Centronics IEEE 488/1284 paral- lel, serial, and up to two optional network interfaces—to be active at...

  • Page 20: Energy Star Compliance

    User Benefit—You save time and print media because it’s unneces- sary to resend a print job after clearing a media jam. Energy Star Compliance The QMS 1660 Print System is compliant with US Environmental Protection Agency (EPA) Energy Star regulations. After a specified...

  • Page 21: Software Loadable System

    The QMS CrownNet Interface System Administrator’s Manual explains how to begin a remote console session, and the QMS Crown Remote Console User’s Guide explains how to use a remote console to control and configure the printer.

  • Page 22: Printer Options

    SIMM, its manufacturers and part numbers, and the QMS products on which it’s used. See appendix A, “QMS Customer Support,” of this manual to find out how to access Q- FAX documents. User Benefit—Your printer’s memory can be upgraded as your needs grow.
  • Page 23 Morisawa and Company, Ltd.) as well as the fonts Mincho Medium, Mincho Heavy, Gothic Bold, and Gothic Heavy (licensed to QMS by TypeBank). These fonts can be printed at a variety of point sizes and in different styles and resolutions.

  • Page 24: Security Card

    CrownNet Network Interfaces Using a CrownNet network interface card (NIC), the QMS 1660 Print System can be attached to an Ethernet and/or a Token-Ring network running multiple protocols. Contact your QMS vendor for a list of available protocols.

  • Page 25: What's Next

    What's Next? What's Next? Chapter 2, “Setting Up Your Printer,” explains how to find a good loca- tion for the printer, unpack the printer, install a toner cartridge, and load and install a 250-sheet paper cassette. Introduction 1-17...

  • Page 27: Setting Up Your Printer

    Setting Up Your Printer In This Chapter... Finding a good location for the printer Unpacking the printer Installing a toner cartridge Loading and installing a 250-sheet paper cassette...

  • Page 28: Introduction

    Introduction Introduction This chapter explains how to set up your QMS 1660 Print System for the first time. It includes information on finding a good location for the printer, unpacking it and checking the shipment contents, installing a toner cartridge and paper cassette, and printing a start-up page.

  • Page 29: Power Requirements

    Finding a Good Location the paper cassette. In other words, with the 11" x 17"/A3 paper cassette installed, you need an area at least 25.4"/664 mm x 49.2"/1250 mm. 3.4" (85 mm) " 3.5" (90 3.9" (100 mm) 49.2" (1250 Power Requirements Your printer requires a properly grounded AC outlet with a power range of ±10% of the rated voltage (100, 110/120, or 220/240 V).

  • Page 30: Checking Shipment Contents

    Note: Interface cables aren’t included in the shipment. If you need » cables, contact your QMS vendor or a local computer store. Chapters 3, “Connecting to a Macintosh,” and 4, “Connecting to a PC,” of this manual specify the type of cable you need.

  • Page 31: Registering The Printer

    Register it now, and we’ll send you a special gift. To register by mail, fill out and send in your warranty card. To register by telephone, in the US call QMS toll-free at (800) 637-8049. In other countries, refer to appendix A, “QMS Customer Support,” for the appropriate telephone number.
  • Page 32 Remove the protective plastic covering and tape from the printer body. Using both hands, open the multipurpose tray. Open the printer's front cover. Release Button QMS 1660 Print System Getting Started...
  • Page 33 Unpacking the Printer Remove the two orange shipping spacers from inside the printer. Remove the piece of cardboard that holds the paper lift plate in place. Setting Up Your Printer...

  • Page 34: Installing Consumables

    Keep the toner cartridge away from your computer. The magnets in the cartridge can damage data, particularly on your floppy disks. Lift the toner cartridge out of its shipping carton, open the aluminum protective bag, and remove the cartridge. QMS 1660 Print System Getting Started...
  • Page 35 Installing Consumables Remove the black protective sheet, and discard it. Place the cartridge on a stable, flat surface to get a good grip on the protective sheet tab. Distribute the toner in the cartridge. Hold the cartridge with both hands, and gently rock it from side- to-side five or six times to distribute the toner.
  • Page 36 Pull the orange tab (26.4"/670 mm) straight out, and then discard both the orange tab and the tape seal. Tape Seal 2-10 QMS 1660 Print System Getting Started...

  • Page 37: Loading The 250-Sheet Paper Cassette

    This may deteriorate the drum and reduce print quality. Loading the 250-Sheet Paper Cassette The QMS 1660 Print System comes standard with two 250-sheet paper cassettes (letter/A4 and ledger/A3). Load paper in either 250- sheet cassette as follows.
  • Page 38 The cassette holds about 250 sheets of 20 pound (75 g/m paper. Insert the paper into the appropriate cassette. Make sure the paper lies flat, does not exceed the top limit mark, and rests under the retaining clips. Top Limit Bottom 2-12 QMS 1660 Print System Getting Started...
  • Page 39 Installing Consumables Slide the cassette into the cassette slot until it’s firmly seated. Adjust the media stop to fit the paper size. The printer delivers your output, print-side down, to the output tray at the top of the printer. The media stop keeps the sheets positioned in the output tray.
  • Page 40 Installing Consumables If you’re using either a ledger /A3 or an optional legal/B4 media cassette, place the cassette rear cover on the end of the cassette at the rear of the printer. 2-14 QMS 1660 Print System Getting Started...

  • Page 41: Connecting The Power Cord

    Connecting the Power Cord Connecting the Power Cord The power cord connector is located at the rear of the printer. The power switch is located at the lower right of the printer. Caution: Make sure that the printer power switch is turned off (the O is pressed down).

  • Page 42: Printing A Start-Up Page

    Start-up Page Printing a Start-up Page When you turn on the printer, a start-up page prints. This page gives you an overview of your QMS 1660 Print System. The following information prints on the start-up page: Printer product name Cumulative number of printed sheets...

  • Page 43: Enabling/Disabling The Start-Up Page

    However, you may need the information included on the start- up page after you have disabled the page (for example, to provide to QMS Customer Technical Assurance). You can disable (and enable) the start-up page in two different ways: Use the PS Executive Series Utilities.

  • Page 45: Connecting To A Macintosh

    Connecting to a Macintosh In This Chapter . . . Printer-host interface AppleTalk port connection Macintosh printing software...

  • Page 46: Introduction

    (see your computer or network documentation). » Note: If you’re connecting your printer to a network, see your network documentation for connection information. QMS 1660 Print System Getting Started...

  • Page 47: Before Making The Connection

    Interface cables are not included with your printer. If you’re replacing a printer, you may already have the necessary cables. If not, contact your QMS vendor or a local computer store. To connect your printer to a single Macintosh, you need the following:...
  • Page 48 Test communication between the printer and the Macintosh. You can do this by sending a file from one of your applications, or you can refer to “Testing Communication” in chapter 6, “Trouble- shooting,” of the Operation guide. QMS 1660 Print System Getting Started...

  • Page 49: Macintosh Printing Software

    PS Executive Series Utilities The 1660 PPD file Application-specific printer files Installing PS Executive Series Printer Utilities The PS Executive Series Utilities (or PS Exec), included on the Mac- intosh-format disks we shipped with your printer, is a utilities program for controlling the printer from the Macintosh.
  • Page 50 LaserWriter driver itself. When the installation is finished, you are prompted to choose Continue to install additional options from the Cus- tom installation option or to choose Quit to exit the Installer program. QMS 1660 Print System Getting Started...
  • Page 51 System 6 users—Create a folder called Printer Descriptions inside the System Folder. Open the 4.1 PPDs folder inside the PSExec 3. xx ƒ folder. Select the QMS 1660 Print System PDF, and drag it to the Printer Descriptions folder. From the Apple menu, choose Chooser.
  • Page 52 PPD. Exit from the Chooser. Now, when you open the application, you can access QMS print- ing options by choosing Options in your application’s Print dialog box. Choose Help in the Options dialog box for information on these options.
  • Page 53 Custom Install procedure. Refer to the PS Exec installation instructions at the very beginning of this section. If you use QuarkXPress, install the QMS 1660 and 1660E PDFs in the PDF folder in the QuarkXPress folder. While QuarkXPress 3.3 allows you to access either a PDF or a PPD, to have access to all of your printer’s features, you...

  • Page 54: A Note For Users Of "Aldus" Applications

    If you use Adobe PhotoShop, go to PhotoShop’s Page Setup dialog box, and select Use Printer’s Default Screen under the Screens option. This allows your choices in the QMS driver to take effect. What's Next? Now that you’ve connected your printer to a Macintosh, skip to chap- ter 5, “Control Panel,”...
  • Page 55 Connecting to a In This Chapter . . . Connecting via the parallel port Connecting via the serial port Using PS Executive Series Utilities Using the QMS-developed Windows driver...

  • Page 56: What You Need

    Interface cables are not included with your printer. If you’re replacing a printer, you may already have the necessary cables. If not, contact your QMS vendor or a local computer store. To connect your printer to a single PC, you need one of the following: A parallel cable with a 36-pin male and a 25-pin male connector.
  • Page 57 Before Making the Connection Choosing a Cable Parallel cable—If a parallel port is available on your PC, we recom- mend using a parallel cable. Your printer supports both Centronics parallel and IEEE 1284 bidirectional parallel communication. The type of parallel cable you use depends on the type of parallel communica- tion your PC supports (check your PC’s documentation if you’re unsure).

  • Page 58: Making The Connection

    To Printer Connect the 36-pin end of the cable to the printer’s parallel port (it’s labeled “PARALLEL”). Close the clips. Connect the 25-pin end of the cable to the PC’s parallel port. Tighten the screws. QMS 1660 Print System Getting Started...
  • Page 59 Making the Connection Serial Cable Printer 9-pin Female Port 9-pin Male Port OR 25-pin Male Port To PC To Printer Connect the serial cable, null modem assembly, and, if necessary, an adapter. Connect one end of the serial cable-null modem assembly to the printer’s serial port (labeled “SERIAL”) and the other end to the PC’s serial port.

  • Page 60: Pc Printing Software

    Installing a PostScript Printer Driver If you're using Windows, we recommend that you install the QMS-developed Windows driver. See “Installing the QMS Windows Driver,” below. If you're using a non-Windows application, read the printing sec- tion of the application documentation for information on choosing a PostScript driver.
  • Page 61 In the Add Unlisted or Updated Printer dialog box, select the appropriate printer: If you’re using the QMS Level 2 Windows printer driver, select your printer (for example, QMS 1660 Level 2) from the list of printers, and choose OK. Connecting to a PC...

  • Page 62: Printer Description Files

    11 Choose Set As Default Printer to make the QMS printer the default printer. 12 Repeat steps 3-10 to install the QMS driver for other ports, or choose Close to exit from the Printers dialog box. Now you can set printer options from your application by choosing Print Setup from the application’s File menu and then choosing the...

  • Page 63: Printing From The Pc

    QMS driver with this application, refer to chapter 6, “Trouble- shooting,” in the Operation guide for more information. If you use QuarkXPress 3.3, after you install the QMS driver install the QMS 1660 PDF according to the instructions in your QuarkXPress documentation. Printing from the PC You're now ready to print from your PC.

  • Page 65: Control Panel

    Control Panel In This Chapter... Control panel indicators Control panel message window Control panel keys...

  • Page 66: Introduction

    Lights when the printer requires operator intervention. This indicator is usually accompanied by a status message in the message window. Lights when the printer is receiving data from one or more of the simultaneous interfaces. QMS 1660 Print System Getting Started...
  • Page 67 Control Panel Indicators Lights when the printer is on line and ready to accept and process new print jobs. Press it once to take the printer off line (the indicator is not lighted) and make the printer ready for configuration. Lights when you access the configuration menu and remains on until you press the Online/Offline key to put the printer back on line.

  • Page 68: Message Window

    You can either let the printer restart automatically after you save the change and exit from the configuration menu, or you can wait for the change to take effect the next time you manually turn on the printer. QMS 1660 Print System Getting Started...

  • Page 69: Control Panel Keys

    Control Panel Keys Control Panel Keys Online/Offline, Cancel, and Status Page Keys The Online/Offline, Cancel, and Status Page keys access frequently used printer options. Press the Online/Offline key once to take the printer off line (the indicator goes out). You must take the printer off line before using all other keys except the Cancel and Status Page keys.

  • Page 70: Menu, Next, Previous, And Select Keys

    Press the Previous key to return to the previous selection or option for the current menu. When changing character information, use this key to return to the previous choice for the current input character. QMS 1660 Print System Getting Started...

  • Page 71: What's Next

    What's Next? Press the Select key to access a menu or to choose a displayed menu option. What's Next? Now, you’re ready to print. For more information on the day-to-day operation of your printer, refer to the Operation manual. For more technical information, refer to the Reference manual.

  • Page 73: Qms Customer Support

    QMS Customer Support In This Appendix . . . Sources of customer support QMS world-wide offices...

  • Page 74: Sources Of Support

    In this case, the application manufacturer is the best source of help. Q-FAX Q-FAX, a QMS information retrieval service, provides application notes, technical support notes on common printing problems, and information about printer specifications, options, accessories, con- sumables, and prices.

  • Page 75: The Qms Corporate Bulletin Board System

    QMS. You can access the QMS server via any one of the many web viewers available to Internet users. If you don’t have access to a web viewer, we recommend the NCSA Mosaic web viewer (Mosaic is at ftp.ncsa.uiuc.edu).

  • Page 76: Qms Customer Response Center (Crc

    Your printer firmware version (listed on the status and start-up pages) QMS National Service The following numbers are valid in the US. To contact QMS in other countries, see the list of world-wide offices in the following section. (800) 762-8894...

  • Page 77: Qms World-Wide Offices

    QMS World- wide Offices QMS World-wide Offices United States/ QMS, Inc. Latin America One Magnum Pass Mobile, AL 36618 (334) 633-4300 Product Information: (800) 523-2696 OEM Information: (800) 631-2692 Consumables: (800) 777-7782 Fax: (334) 633-4866 E-mail: info@qms.com Latin America Fax: (334) 639-3347...

  • Page 79: Configuration Menu

    Configuration Menu In This Chapter . . . Configuration menu diagram...
  • Page 80 Installation Operator Control Administration Operator Passwrd Copies Communications Emulations Special Pages Startup Options Memory Engine Miscellaneous Use Operator Pwd Collation Timeouts ESP Default Print Status Do Start Page K Mem For Spool Image Alignment Restore Defaults Postscript Calibration Page Do Sys Start K Mem For PSHeap Reboot System Admin Password...

  • Page 81: Index

    Index %%EndOfDocument (R)4-38 Active jobs <ESC>%12345X (R)4-38 Status message (O)6-9 1200x600 dpi resolution unavailable Add EOD command, to your file (O)6-28 (R)5-28 1284, IEEE, cable pinouts (R)B-7 Adjust Inputbin bin 3 hole punched (O)6-29 Status message (O)6-9 500-sheet paper cassette (R)6-13 Administration menu (R)4-5 600x600 dpi resolution unavailable Memory (R)4-47...
  • Page 82 Buffer (R)G-2 Antique Olive (R)6-36 Frame, allocating memory (R)4-50 AppleTalk (R)G-1 Sizes (O)3-9 Connection (GS)3-3 Spooling (R)5-20 See also LocalTalk Bulletin board, QMS (GS)4-7, (GS)A-3, Testing communication (O)6-13 (O)A-3, (R)A-3 Troubleshooting (O)6-22 Buzzer Application (R)G-1 Menu (R)4-58 Configuration, printer (R)4-2...
  • Page 83 Colophon (R)D-4 Connector box (R)G-3 Color encoding HP-GL (R)5-35 Communication Legend Modes (R)5-3 Settings (O)3-9 Getting Started manual Testing, Macintosh (O)6-13 Operation manual Testing, parallel port (O)6-13 Reference manual Testing, serial port (O)6-13 — QMS 1660 Print System Master Index...
  • Page 84 Intellifont SIMM (R)6-34 Pitch (R)3-5 Disk operations Collation (O)3-6 Legend Disk Operations menu (R)6-54 Disk swap (R)4-49, (R)6-56 Getting Started manual Display (R)4-48 Operation manual Display list (R)5-17 Reference manual Do Error Handler menu (R)4-62 — QMS 1660 Print System Master Index...
  • Page 85 PCL 5 parameters, setting (R)4-18 (O)1-3, (R)1-4 PostScript parameters, setting (R)4-27 Printer (GS)1-2 Setting parameters (R)4-14 QMS (GS)1-2 Temporary, allocating memory (R)4-49 QMS Crown Remote Console User’s Timeout (R)4-66 Guide (GS)1-4 Emulation error (O)6-25 Related (GS)1-5 Emulation Level menu (PostScript) Standard (GS)1-3...
  • Page 86 PCL error codes (O)6-12 See also Status messages Legend Waiting for idle (O)6-10 Waiting on input end job (O)6-10 Getting Started manual ESP (R)5-24 Operation manual Printing modes (R)5-2 Reference manual Setting parameters (R)4-14 — QMS 1660 Print System Master Index...
  • Page 87 Garamond (Stempel) (R)6-36 Installing on hard disk (R)4-29 Installing optional (R)6-57 Legend Intellifont proms (R)6-32 Intellifont SIMM (R)6-36 Getting Started manual Intellifonts (R)6-36 Operation manual Intellifonts, troubleshooting (O)6-26 Kanji option kit (R)6-61 Reference manual — QMS 1660 Print System Master Index...
  • Page 88 Scaling Percent menu (R)4-17 Setting parameters (R)4-14 HP-GL symbol sets (R)3-10 Legend 9825 Character Set symbol set (HP-GL) (R)3-10 Getting Started manual ANSI ASCII (R)3-10 Operation manual French/German (R)3-10 Reference manual ISO French (R)3-10 — QMS 1660 Print System Master Index...
  • Page 89 Ignore Par. Err. menu (serial) (R)4-39 Image alignment (O)3-9, (R)2-3, Legend (R)4-56 Image Alignment menu (R)4-56 Getting Started manual Image orientation problem (O)6-30 Operation manual Imageable area (R)2-2 Image alignment (R)2-3 Reference manual — QMS 1660 Print System Master Index...
  • Page 90 Troubleshooting (O)6-25 ISO Spanish symbol set (HP-GL) Kanji option kit (R)6-61 (R)3-10 Katakana symbol set (HP-GL) (R)3-10 Legend See key name Keypad language menu (R)4-11 Getting Started manual Operation manual Reference manual — I-10 QMS 1660 Print System Master Index...
  • Page 91 Lines per Page menu (R)4-25 Legend Margins menu (R)4-26 Orientation menu (R)4-26 Getting Started manual Parameters, setting (R)4-23 Point Sz 100ths menu (R)4-26 Operation manual Tab Stops menu (R)4-26 Reference manual Lines per inch (R)5-5 — QMS 1660 Print System Master Index I-11...
  • Page 92 Allocating (R)4-47 Spooling (O)3-9, (R)4-53 Storage (R)5-11 System Use (R)4-52 Legend Upgrade (SIMMs) (R)6-26 Virtual (R)5-13, (R)5-19, (R)5-22, Getting Started manual (R)5-23 Operation manual Volatile (R)5-12 Reference manual Memory clients (R)5-9, (R)5-17, (R)G-9 — I-12 QMS 1660 Print System Master Index...
  • Page 93 Offset, image, configuring (R)4-56 Mode menu Omega (R)6-36 LocalTalk (R)4-30 Parallel (R)4-35 Serial (R)4-40 Legend Mode, printing (R)5-2 PostScript (R)5-2 Getting Started manual Modes, communication (R)5-3 Operation manual Monochrome HP-GL/2 menu (PCL5) Reference manual (R)4-20 — QMS 1660 Print System Master Index I-13...
  • Page 94 Orientation menu (R)4-45 Standard (O)2-3 Paper feeder (O)3-4, (R)6-4, (R)6-9 Legend Installing (R)6-4 Removing (R)6-9 Getting Started manual Paper jam Operation manual Message stays on (O)6-23 Reference manual See also Jams (O)6-9 — I-14 QMS 1660 Print System Master Index...
  • Page 95 Lines per Inch menu (R)4-19 Macros, temporary, retaining (R)4-21 Testing communication (O)6-13 Parallel protocol (R)5-25 Parity Legend Errors, ignore (R)4-39 Ignore errors (R)4-39 Getting Started manual Serial (R)4-41 Operation manual Parity menu Reference manual Serial (R)4-41 — QMS 1660 Print System Master Index I-15...
  • Page 96 Cancelling (O)3-11, (O)3-12 Weight (R)2-5 Print media Page sizes and imageable regions (R)2-2 Legend Preventing jams (O)2-2 Print media jams Getting Started manual Curled (O)3-4 Operation manual Locating (O)6-2 Reference manual Locations (O)6-3 — I-16 QMS 1660 Print System Master Index...
  • Page 97 Q-FAX (GS)4-7, (GS)A-2, (O)A-2, (R)A-2 Warning (R)6-32 Printing Blank pages (O)6-29 Environments (R)5-13 Legend Incomplete jobs (O)6-30 Modes (R)5-2 Getting Started manual Two-sided (O)3-4 Operation manual Printing status Reference manual Status message (O)6-10 — QMS 1660 Print System Master Index I-17...
  • Page 98 Resident fonts (R)A-4 HP PCL fonts (R)3-9, (R)3-10 Q-FAX (GS)4-7 Resolution (O)5-2 Registration, printer (GS)2-5 1200x600 dpi unavailable (O)6-28 QMS Crown Remote Console User’s 600x600 dpi unavailable (O)6-28 Guide (GS)1-4 Changing (O)3-2 QMS EOD (R)4-38, (R)5-26 Setting (R)4-59 QMSPS.DRV, troubleshooting (O)6-24 Resource (R)C-7 QSCRIPT.DRV, troubleshooting...
  • Page 99 Header pages (R)4-64 Serial protocol (R)5-25 Serif typefaces (R)3-3 Service call Legend Placing (O)6-35 Service, QMS Getting Started manual National Service (GS)A-4, (O)A-4, Operation manual (R)A-4 Reference manual United States (GS)A-4, (O)A-4, (R)A-4 — QMS 1660 Print System Master Index I-19...
  • Page 100 Priority (O)6-8 Put size paper in input bin (O)6-10 Legend Reboot Now? (R)4-10 Test print (O)6-10 Getting Started manual Toner absent (O)6-10 Operation manual Toner out (O)6-10 Reference manual Waiting for idle (O)6-10 — I-20 QMS 1660 Print System Master Index...
  • Page 101 Spooling (R)4-42 Customer (GS)A-2, (O)A-2, (R)A-2 Timeouts menu Internet (GS)A-3, (O)A-3, (R)A-3 Emul Timeout (R)4-66 QMS bulletin board (GS)A-3, (R)A-3 ESP Timeouts menu (R)4-66 Technical (GS)A-4, (O)A-4, (R)A-4 Job Timeout menu (R)4-68 United States (GS)A-4, (O)A-4, (R)A-4 PS Wait Timeout (R)4-67...
  • Page 102 Service calls (O)6-35 Start-up page (O)6-31 Status page (O)6-19, (O)6-32 Legend Windows driver (O)6-24 Two-sided printing (O)3-4 Getting Started manual Typeface (R)3-2 Operation manual Card (R)6-18, (R)6-19 Reference manual Courier (R)3-8, (R)3-9, (R)6-36 — I-22 QMS 1660 Print System Master Index...
  • Page 103 Using the EOD commands (R)5-26 Vendor Labels (R)B-13 Legend Paper (R)B-13 Transparencies (R)B-13 Vertical Offset menu (R)4-57 Getting Started manual Virtual disk (R)5-12 Operation manual Virtual memory (R)5-13, (R)5-19, Reference manual (R)5-22, (R)5-23 — QMS 1660 Print System Master Index I-23...

Table of Contents