Logic For Group Alarm Almcalh - ABB RELION 670 SERIES Applications Manual

1MRK 506 369-UUS -
17.3
17.3.1
17.3.2
17.3.3
17.4
17.4.1
17.4.1.1
17.4.1.2
Line distance protection REL670 2.2 ANSI
Application manual

Logic for group alarm ALMCALH

Identification
Function description
Logic for group alarm
Application
Group alarm logic function ALMCALH is used to route alarm signals to different LEDs
and/or output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm
signal to physical tripping outputs according to the specific application needs.
Setting guidelines
Operation: Enabled or Disabled
Logic for group alarm WRNCALH
Identification
Function description
Logic for group warning
Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/
or output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt
the warning signal to physical tripping outputs according to the specific application needs.
Setting guidelines
OperationEnabled or Disabled
IEC 61850 IEC 60617
identification identification
ALMCALH -
IEC 61850 IEC 60617
identification identification
WRNCALH -
Section 17
Logic
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
799