ABB RELION 670 SERIES Applications Manual page 881

1MRK 506 369-UUS -
Line distance protection REL670 2.2 ANSI
Application manual
• Function commands in control direction
Function block with user defined functions in control direction, I103UserCMD. These
function blocks include the FUNCTION TYPE parameter for each block in the private
range, and the INFORMATION NUMBER parameter for each output signal.
Status
For more information on the function blocks below, refer to the
Communication protocol manual, IEC 60870-5-103.
The events created in the IED available for the IEC 60870-5-103 protocol are based on the:
• IED status indication in monitor direction
Function block with defined IED functions in monitor direction, I103IED. This block use
PARAMETER as FUNCTION TYPE, and INFORMATION NUMBER parameter is
defined for each input signal.
• Function status indication in monitor direction, user-defined
Function blocks with user defined input signals in monitor direction, I103UserDef. These
function blocks include the FUNCTION TYPE parameter for each block in the private
range, and the INFORMATION NUMBER parameter for each input signal.
• Supervision indications in monitor direction
Function block with defined functions for supervision indications in monitor direction,
I103Superv. This block includes the FUNCTION TYPE parameter, and the
INFORMATION NUMBER parameter is defined for each output signal.
• Ground fault indications in monitor direction
Function block with defined functions for ground fault indications in monitor direction,
I103EF. This block includes the FUNCTION TYPE parameter, and the INFORMATION
NUMBER parameter is defined for each output signal.
• Fault indications in monitor direction
Function block with defined functions for fault indications in monitor direction,
I103FLTPROT. This block includes the FUNCTION TYPE parameter, and the
INFORMATION NUMBER parameter is defined for each input signal.
Section 21
Station communication
875