Quantum DXi4700 User Manual page 80

Chapter 4: Configuration Wizards
VTL Wizard
Figure 48: VTL Wizard: Add Media
Step 4: Discover Remote Hosts
1. Click Discover Remote Hosts to list all hosts that are known to the DXi4700 (see
next page).
A host is made known to the DXi4700 if you enter the host ID on this page, or if the host logs on to one
or more Fibre Channel target ports.
If you do not see the world wide name (WWN) of the host, make sure the host is connected to a Fibre
Channel port on the DXi4700 and click Discover Remote Hosts again.
The Backpanel Locations section displays a graphical representation of the Fibre Channel and
Ethernet ports as they appear on the rear of the system.
Note: An Active status indicates the host is currently logged on to one or more Fibre Channel
target ports.
2. Enter information about the host:
Host Information
Remote Host WWPN
Alias
3. Click Apply.
Quantum DXi4700 User's Guide
Description
Enter the World Wide Port Name (WWPN) of the host.
Enter a descriptive alias for the host
Figure 49 on the
80