Quantum DXi4700 User Manual page 300

Chapter 9: Configuration
System
Example 2: Segments and Target on the Same Subnet
In the example below (see
management traffic, and one for replication traffic:
The source DXi management/data IP address, the source DXi replication IP address, and the target DXi
l
IP address are all on the same subnet (192.168.10.x).
To make sure the replication segment is used when communicating with the target DXi, you must add a
l
host route in the Routing Details section on the source DXi.
In this example, you would specify the following routing details for the replication interface on the source
DXi:
Destination
Dest Netmask
Dest Gateway
Quantum DXi4700 User's Guide
on page 290), the DXi has two segmented interfaces, one for data and
Use the IP address of the target DXi (192.168.10.200).
Use 255.255.255.255.
Use the replication IP address of the source DXi (192.168.10.100).
300