Quantum DXi4700 User Manual page 284

Chapter 9: Configuration
Notifications
Figure 177: Edit Trap Destination Page
2. Enter information about the destination:
Note: If you are editing a destination, you cannot change the IP Address.
IP Address
Name
3. Select one or more traps to send to the destination:
Failure
Warning
Informational
Available
Unavailable
4. Click Apply.
Deleting a Destination
Delete an SNMP destination if you no longer want the DXi4700 to send traps to the destination.
To delete a destination, select the destination and click Delete.
Note: You can select multiple destinations to delete at once.
Community
The Community page allows you to manage SNMP community information for the DXi4700. You can add,
Quantum DXi4700 User's Guide
(Optional) Select a different destination to edit.
Enter the name of the destination.
Sends failure traps.
Sends warning traps.
Sends informational traps.
Sends a trap when the system transitions from an unavailable to an available state.
Sends a trap when the system transitions from an available to an unavailable state.
284