Quantum DXi4700 User Manual page 239

Chapter 9: Configuration
OST Configuration
Note: You must configure at least one remote user before you can enable Automatic Image
Replication (see
7. If Automatic Image Replication is enabled, select the replication target you want to replicate images to.
(You can select only a single target.) When images are replicated, data will be sent to the selected
target.
8. If Automatic Image Replication is enabled, specify the following information:
Remote The name of the remote storage server (on the target DXi) to replicate data to. The source DXi
Storage and target DXi must reside in different NetBackup domains.
Server
Name
Remote The name of the LSU in the remote storage server that will receive the replicated data.
LSU
Name
Remote The OST user credentials to use for authentication on the remote (target) DXi. The selected
User remote user must match a local user on the Configuration > OST > Manage Users page on
the target DXi (see
9. Click Apply.
Editing a Storage Server
Edit a storage server to change the description of the storage server or the maximum number of allowed
connections.
To edit a storage server:
1. Select the storage server and click Edit.
The Edit Storage Server page displays (see
Figure 152: Edit Storage Server Page
2. Enter information about the storage server:
Quantum DXi4700 User's Guide
Manage Remote Users on page
Note: To configure the target DXi, see
Manage Users on page
246).
Replication Send on page
319).
Figure 152 below).
129.
239