Dxi4700 Expansion Module Rear Panel Features - Quantum DXi4700 User Manual

Chapter 2: Basic Operations
DXi4700 Expansion Module
Item Indicator, Button, or
Connector
Enclosure status LED
1
2 Power LED
DXi4700 G1 only - Split
3
mode LED
4 System identification button
DXi4700 G1 only -
5
Enclosure mode switch
6 Hard drives

DXi4700 Expansion Module Rear Panel Features

above shows the connectors located on the rear panel of the DXi4700 G1 Expansion module.
Quantum DXi4700 User's Guide
Icon Description
The enclosure status LED lights when the enclosure
power is on:
Lights blue during normal operation and when the host
server is identifying the enclosure.
Blinks blue when a host server is identifying the
enclosure or when the system identification button is
pressed.
Lights amber when the enclosure is turned on or is
reset.
Blinks amber when the enclosure is in the fault state
(see General Troubleshooting on page
The power LED lights when at least one power supply
is supplying power to the enclosure.
Not used.
Press to toggle the system ID on and off.
The system identification button on the front control
panel can be used to locate a particular enclosure
within a rack. When the button is pushed, the system
status indicators on the control panel and the EMM
blinks blue until the button is pushed again.
Not used.
Twelve 3.5 inch hot-swappable hard drives (4 TB
each).
379.).
47