Chapter 9: Configuration
Notifications
Adding a Community
Add an SNMP community to include the DXi4700 in a group of devices that are monitored by a common
management station.
Note: If no communities are defined, the SNMP agent is not accessible.
To add a community:
1. Click Add.
The Add SNMP Community page displays (see
Figure 179: Add SNMP Community Page
2. In the Name box, enter a unique Name for the community (up to 20 characters).
Valid characters are letters, numbers, hyphens, and underscores.
3. Enter a valid IP Address and Network Mask pair.
A pair is valid if performing a logical bitwise AND operation on the IP address and the network mask
results in the IP address. See the table below for examples:
IP Address / Network Mask
10.40.166.87
255.255.255.255
10.40.166.87
10.40.166.87
10.40.166.87
10.40.166.0
Quantum DXi4700 User's Guide
Figure 179
below).
Result
Allows access only from 10.40.166.87
Allows access only from 10.40.166.87
Invalid because the logical bitwise operation (address AND mask) is
not equal to the address
286