Quantum DXi4700 User Manual page 147

Chapter 6: Replication
Receive NAS
Note: Click the Information button [i] next to a partition to display detailed information about the share
and recent replication activity.
Configuring a Target Share for Directory/File Based Replication
Configuring a NAS share for Directory/File Based Replication enables the automatic replication of files and
directories on the source partition to the target share. Before you configure a share on the source system for
Directory/File Based Replication, you must configure a share on the target system to receive the replicated
data from the source share.
Note: For information about configuring Directory/File Based Replication on the source system, see
Configuring Directory/File or Cartridge Based
To configure a target share for Directory/File Based Replication:
1. Select the share and click Edit.
The Edit Share Settings page displays (see
Figure 93: Edit Share Settings Page
2. Select the Enable to receive Directory/File Based replication data check box to enable
Directory/File Based Replication for the share.
Or clear the Enable to receive Directory/File Based replication data check box to disable
Directory/File Based Replication for the share.
3. Enter a Sync ID in the box.
The Sync ID is used to identify the source share that will send replicated data to the target partition. The
Sync ID must be identical to the Sync ID of the source share on the source system.
4. Select an Access option:
Locked - The share is not allowed to receive new Directory/File Based Replication data.
l
Unlocked - The share is allowed to receive new Directory/File Replication data.
l
Quantum DXi4700 User's Guide
Replication.
Figure 93 below).
147