Quantum DXi4700 User Manual page 58

Chapter 3: Remote Management
Accessing Remote Management
Figure 33: Login Window
If the Login window does not display, verify that the IP address is correct and that the network path to
the DXi4700 is valid. Also verify that you are using a supported Web browser. Then try again. If you are
still unable to access the Login window, contact your administrator.
Note: The default IP address is 10.1.1.1. The IP address can be changed during installation using
the Getting Started Wizard or at a later time on the Network page (see
3. Select the login type and enter the corresponding password.
Monitor - Allowed to view information on the DXi4700 remote management console but cannot
l
make changes.
Administrator - Allowed to view and change information on the DXi4700 remote management
l
console.
Service - Allowed to view and change information on the DXi4700 remote management console.
l
Password changes are not allowed.
LDAP/AD - Allows users assigned system access through a Lightweight Directory Access Protocol
l
(LDAP) or Active Directory (AD) server to log into the DXi4700 remote management console.
LDAP/AD must be enabled on the LDAP/AD page for this login type to appear (see
page 307).
Note: Passwords are limited to 32 characters. Alphanumeric characters and special characters
are allowed. Passwords can be changed on the Access Control page (see
page 304).
4. Click Login.
5. If you log in as a user assigned to the Admin role (local or LDAP) and there were previous unsuccessful
DXi4700 logins, a dialog box appears indicating the previous number of unsuccessful login attempts for
both the current account and all accounts on the DXi4700(see
Click OK to continue.
l
Click View Admin Log to access the Administrative Activity Log page (see
l
Quantum DXi4700 User's Guide
Network on page
Security on
Figure 34 on the next page).
Activity Log on
290).
LDAP/AD on
58