Quantum DXi4700 User Manual page 283

Chapter 9: Configuration
Notifications
IP Address
Name
3. Select one or more traps to send to the destination:
Failure
Warning
Informational
Available
Unavailable
4. Click Apply.
Editing a Destination
Edit an SNMP destination to change the name of the destination or the types of traps the DXi4700 sends to
the destination.
To edit a destination:
1. Click Edit.
The Edit Trap Destination page displays (see
Quantum DXi4700 User's Guide
Enter the IP address of the system that will receive the traps generated by the DXi4700.
Additional Information
When entering IP addresses, never use an address that is in a reserved IP address
l
range. To see a list of reserved IP address ranges, click the quick tip icon [?]
located near the IP address field.
To use hostname format, you must specify at least one DNS IP address on the
l
Network page (see Network on page
Enter the name of the destination.
Sends failure traps.
Sends warning traps.
Sends informational traps.
Sends a trap when the system transitions from an unavailable to an available state.
Sends a trap when the system transitions from an available to an unavailable state.
290).
Figure 177 on the next page).
283