Quantum DXi4700 User Manual page 306

Chapter 9: Configuration
System
Accessing Remote Management on page
1. Under GUI Administrator enter the following information:
Old Password
New Password
Confirm New Password
Additional Information
Disabling the GUI Administrator - You cannot disable this account unless LDAP/AD is enabled. In
l
addition, you must also be logged in to the system as an LDAP/AD user (see
next page).
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
l
allowed.
Loss of this password will require Quantum service support.
l
2. Click Apply.
Enabling GUI Monitor Account
Use the GUI password when logging onto the remote management console as a monitor (see
Remote Management on page
1. Under GUI Monitor do one of the following steps:
Select the Enable account check box to enable the GUI monitor account.
l
Clear the Enable account check box to disable the GUI monitor account.
l
2. Enter the following information:
New Password
Confirm New Password
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
allowed.
3. Click Apply.
Quantum DXi4700 User's Guide
57).
Enter the old password.
Enter the new password.
Enter the new password again to confirm it.
57).
Enter the new password.
Enter the new password again to confirm it.
LDAP/AD on the
Accessing
306