Quantum DXi4700 User Manual page 97

Chapter 4: Configuration Wizards
Users Wizard
User Information
Manage User
Remote User
Quantum DXi4700 User's Guide
Description
Select the check box if the authorized user will be able to access Application
Specific (RMAN) shares, OST Storage servers, or PTT (DXi4700 Multi-
Protocol only).
OpenStorage (OST) and Oracle Recovery Manager (RMAN)
After you create OST or RMAN user credentials, enter them in the backup
application to authenticate on the media (OST) or Oracle (RMAN) server.
Note: When using OST Automatic Image Replication (AIR), the
remote user credentials specified on the source DXi must match the
local user credentials on the target (remote) DXi.
Path to Tape (PTT)
The following applications are supported for backup application specific
path to tape:
Veritas NetBackup
l
Veritas Backup Exec
l
EMC Networker
l
Note: EMC NetWorker 8.1 and later do not support Backup
Application Specific Path to Tape.
Oracle Secure Backup
l
ASG-Time Navigator
l
Note: You must dedicate a partition within the DXi for use with
NetBackup Direct to Tape (Path to Tape). The partition cannot be
shared with another backup application.
Caution: The virtual media changer and tape drives must be
assigned to the backup server (on the SAN) being used for Backup
Application Specific path to tape functionality.
Select the check box if the authorized user will be for OST Automatic Image
Replication.
Note: To configure the LSU for Automatic Image Replication, use the
Configuration > OST > LSU page (see LSU on page 241).
97