Quantum DXi4700 User Manual page 279

Chapter 9: Configuration
Notifications
The system can generate a report with system status data or with configuration data. Each report also
includes the system serial number, date and time, and a message that informs the recipient that the e-mail is
automated and they should not respond to it.
Note: To enable the DXi4700 to send e-mail, you must specify an outgoing e-mail server (see
on page 277).
To access the Email Reports page, on the Email page, click the Email Reports tab.
The Email Reports page contains the following tabs:
Recipients
The Recipients page allows you to specify the e-mail recipients who will receive all scheduled status data
and configuration data reports.
Note: To configure the schedule when e-mail reports are sent, use the Configuration > Scheduler
page (see Scheduling E-mail Reports on page
To access the Recipients page, on the Email Reports page, click the Recipients tab (see
below).
Figure 173: Recipients Page
Enter the e-mail addresses of up to four recipients in the boxes, and then click Apply. When the DXi
generates scheduled e-mail reports, they will be sent to the specified addresses.
On Demand
The On Demand page allows you to manually generate a status data or configuration data report. The
report is immediately sent to the specified e-mail recipient. You can also view configuration data.
To access the On Demand page, on the Email Reports page, click the On Demand tab (see
on the next page).
Quantum DXi4700 User's Guide
270).
Server
Figure 173
Figure 174
279