Quantum DXi4700 User Manual page 72

Chapter 4: Configuration Wizards
NAS Wizard
Name
Description
Protocol
Enable deduplication
Hide from network browsing
2. Click Add.
3. (Optional) To add additional shares, repeat Steps 1–2.
4. Click Next to continue.
Quantum DXi4700 User's Guide
Enter the name of the NAS share.
Additional Information
NAS share names are not case-sensitive. For example, if you
l
create a share named nas1, you cannot create another share
named NAS1 because the system considers the names to be the
same.
Virtual Machine (VM) NAS shares must be named "VM" (upper
l
case).
(Optional) Enter a brief description of the share.
Select the export protocol for the share:
CIFS/SMB - Select the CIFS/SMB option to use the share on a
l
Windows network.
NFS - Select the NFS option to use the share on a UNIX or Linux
l
network.
Application Specific - Select the Application Specific option to
l
create an Oracle RMAN share.
(CIFS/SMB/NFS shares only) Select the check box to enable data
deduplication. Quantum recommends that you enable data deduplication
to optimize disk usage.
Additional Information
Data deduplication is enabled by default. You cannot enable or
l
disable data deduplication after the share is added.
Deduplication of Application Specific shares is enabled by default.
l
VM NAS shares must have deduplication disabled.
l
(CIFS/SMB shares only) Select the check box to hide the share from
network browsing. If selected, you cannot see the share when browsing
the network.
72