Quantum DXi4700 User Manual page 81

Chapter 4: Configuration Wizards
VTL Wizard
4. (Optional) To discover additional hosts, repeat Steps 1–3.
5. Click Next to continue.
Figure 49: VTL Wizard: Discover Remote Hosts
Step 5: Map Remote Hosts
1. Enter information about the host access group (see
Host Access Information
Group Name
Partition
Remote Host
Target
To change the LUN numbers assigned to a device, or to map virtual devices to a host, use the
Configuration > VTL > Host Access > Host Mapping page (see
page 224).
2. (Optional) Select the Use CCL check box to use the Command and Control LUN.
Quantum DXi4700 User's Guide
Figure 50 on the next
Description
Enter a name for the group.
Select the partition to associate with the group.
Select the host (initiator) to associate with the group.
Select the target (port) to associate with the group.
Note: The Backpanel Locations section displays a graphical
representation of the Fibre Channel and Ethernet ports as they
appear on the rear of the system. A dark border displays around the
currently selected target.
page):
Remote Host Mapping on
81