Quantum Scalar LTFS Appliance: Hard Drive Blanks Replacement
6-68094-01 Rev A
December 2013
Removing a Hard Drive Blank
Figure 1 Removing the Scalar
LFTS Appliance Bezel
2
Required Tools: None.
Caution: To prevent overheating, do not leave a slot open for more than 5
minutes.
To remove a hard drive blank, complete the following steps:
1 If installed, remove the front bezel:
a Unlock the key lock at the left end of the bezel (see
b Lift the release latch next to the key lock.
c Rotate the left end of the bezel away from the front panel.
d Unhook the right end of the bezel and pull the bezel away from the
chassis of the top Scalar LTFS Appliance.
Release latch (Step 1b)
Bezel (Step 1c)
Key lock (Step 1a)
Figure
1).
Hook (Step 1d)
Chassis
Removing a Hard Drive Blank