Receive Vtl - Quantum DXi4700 User Manual

Chapter 6: Replication

Receive VTL

Note: If a share configured for Directory/File Based Replication is locked on the target system,
synchronization jobs may fail on the source system.
5. Click Apply.
Unpack Queue
Use the Unpack Queue to view Directory/File Replication statistics for data received from the source
system.
To view the Unpack Queue, select a share and click View Unpack Queue (see
Figure 94: Unpack Queue
The Unpack Queue displays the following information:
Barcode The barcode of the file or directory to be replicated.
State The replication state of the file or directory.
Click Refresh to update the statistics in the Unpack Queue. Click OK to return to the Directory/File Based
page.

Receive VTL

The Receive VTL page allows you to manage incoming replication activity for VTL partitions. You can
recover a replicated partition on the target system if the source system is unavailable. Once the source
system becomes available, you can failback the partition to make it available on the source system again.
Note: Before you can receive replicated partitions, you must specify one or more replication sources
(see Adding a Replication
To access the Receive VTL page, click the Replication menu, and then click the Receive > VTL tab.
Quantum DXi4700 User's Guide
Source).
Figure 94 below).
148