Quantum DXi4700 User Manual page 195

Chapter 9: Configuration
NAS Configuration
Name
Description
Protocol
Hide from network browsing
Enable deduplication
3. (Optional) Under Replication Settings, specify replication settings.
For more information about configuring replication for a share, or to set up replication for the share at a
later time, see Replication on page
4. Click Apply.
Quantum DXi4700 User's Guide
Enter the name of the NAS share.
Additional Information
NAS share names are not case-sensitive. For example, if you
l
create a share named nas1, you cannot create another share
named NAS1 because the system considers the names to be
the same.
Virtual Machine (VM) NAS shares must be named "VM"
l
(upper case).
(Optional) Enter a brief description of the share.
Select the export protocol for the share:
CIFS/SMB - Select the CIFS/SMB option to use the share on a
l
Windows network.
NFS - Select the NFS option to use the share on a UNIX or Linux
l
network.
Application Specific - Select the Application Specific option to
l
create an Oracle RMAN share.
(CIFS/SMB shares only) Select the check box to hide the share from
network browsing. If selected, you cannot see the share when
browsing the network.
(CIFS/SMB/NFS shares only) Select the check box to enable data
deduplication. Quantum recommends that you enable data
deduplication to optimize disk usage.
Additional Information
Data deduplication is enabled by default. You cannot enable
l
or disable data deduplication after the share is added.
Deduplication of Application Specific shares is enabled by
l
default.
VM NAS shares must have deduplication disabled.
l
122.
195