Quantum DXi4700 User Manual page 41

Chapter 2: Basic Operations
DXi4700 Node
Table 1: DXi4700 Node - Rear Panel Connectors
Item Indicator, Button, or
Connector
System identification button
1
2 System identification
connector
iDRAC port
3
Serial connector
4
VGA connector
5
USB 2.0 connectors (2)
6
Service port
7
3 x 1 GbE Ethernet ports
8
Power supply (PSU1)
9
Power supply (PSU2)
10
vFlash media card slot
11
Quantum DXi4700 User's Guide
Icon Description
Press to toggle the system ID on and off.
The identification buttons on the front and rear panels
can be used to locate a particular system within a rack.
When one of these buttons is pressed, the system
status indicator on the rear flashes until one of the
buttons is pressed again.
Not used.
For Quantum service use only.
For Quantum service use only.
Use of connected peripheral devices, such as a USB
keyboard and mouse or a VGA display, is not supported
and may cause incorrect system operation.
Use of connected peripheral devices, such as a USB
keyboard and mouse or a VGA display, is not supported
and may cause incorrect system operation.
For Quantum use only.
For data ingest/read.
750 watt hot-swappable power supply.
750 watt hot-swappable power supply.
Not used.
41