Quantum DXi4700 User Manual page 60

Chapter 3: Remote Management
Accessing Remote Management
Figure 36: DXi4700 Home Page
If you are unable to log on, verify that the password is correct, then try again. If you are still unable to log
on, contact your DXi4700 administrator.
Caution: More than one Administrator can log on to the DXi at a time. If two Administrators attempt to
make configuration changes on the same page at the same time, it is possible that one Administrator's
changes will overwrite the other's. Always coordinate configuration changes with other Administrator
users.
Logging Off of the DXi4700
When you are done working in the DXi4700 remote management console, click Logout on the upper right
of the remote management console to end your session.
Additional Information
If the DXi4700 remote management console is idle for more than 30 minutes (default setting), the
l
system logs off the user. The inactivity timeout can be changed on the Login Session page.
There is no inactivity timeout for CLI logins over Secure Shell (SSH).
l
Quantum DXi4700 User's Guide 60