Quantum DXi4700 User Manual page 77

Chapter 4: Configuration Wizards
VTL Wizard
Partition Setting
Library Model
Number of Storage
Slots
Virtual Tape Drive
Model
Quantum DXi4700 User's Guide
Description
Select the library model emulated by the partition. The library model determines
the inquiry string returned to the host by the DXi4700.
The following library models are available:
Quantum DXi7500
l
ADIC Scalar 100, ADIC Scalar i2000, or ADIC Scalar i500
l
ADIC Pathlight VX
l
Quantum Scalar i40/i80 or Quantum Scalar i6000
l
Quantum DXi6700, Quantum DXi6900, Quantum DXi6800, Quantum
l
DXi4700, Quantum DXi4601, QuantumDXi4500, or Quantum DXi8500
Quantum DX3000 or Quantum DX5000
l
Quantum PX500 or Quantum PX720
l
ATL M2500, ATL P1000, or ATL P7000
l
If you select a library such as the ATL P1000 or ATL P7000, the DXi4700
appears as the selected library to the host and backup application. If you select
Quantum DXi4700, the host and backup application recognize the device as a
Quantum DXi4700.
Note: Quantum recommends that you set the library model to Quantum
DXi4700 for best compatibility. If your backup application does not support
the Quantum Quantum DXi4700 inquiry string, select a different library
model. Check your software compatibility guide to verify what library
models are supported.
Accept the default number of storage slots(based on model), or enter the
number of storage slots in the partition (up to 61,000).
One I/E slot is created for each storage slot up to a maximum of 240 I/E slots.
Select the tape drive model emulated by the virtual drives in the partition. All
virtual tape drives in a partition must be the same model.
The following tape drive models are available:
Quantum DLT-S4, SDLT600, SDLT320, or DLT7000
l
Certance LTO-2 and LTO-3
l
IBM LTO-1, LTO-2, LTO-3, LTO-4, and LTO-5.
l
HP LTO-1, LTO-2, LTO-3, LTO-4, and LTO-5.
l
77