Performance View - Quantum DXi4700 User Manual

Chapter 7: Status
VTL Status
The Partitions section displays the following information about VTL partitions:
Partition
Number of Drives
Capacity
Used
Used Percent
Note: Click the Information button [i] next to a partition to display detailed information about the
partition.

Performance View

Use the Performance View page to view information about the throughput of VTL partitions. You can also
view performance for virtual tape drives.
To access the Performance View page, on the VTL Status page, click the Performance View tab (see
Figure 113 on the next
Quantum DXi4700 User's Guide
The name of the partition.
The number of virtual tape drives in the partition.
The storage capacity of the partition.
The amount of space on all cartridges in the partition currently used to store data. The
value for Used might be less than the original, native (raw) data size because the data
is compressed before it is written to the media.
The amount of currently used space on all cartridges in the partition expressed as a
percentage of the total capacity
( [ Used / Capacity ] x 100 ).
page).
174