Sharp SF-2050 Service Manual page 98

Main Sub
Item
code code
3 Sorter individual
load check
Contents
Sorter (SF-S16)
Display name
Sorter paper
SPID
entry sensor
Sorter paper exit
SPOD
sensor
Indexer upper
IULD
limit sensor
Indexer lower
ILLD
limit sensor
Indexer home
IHPS
position sensor
Indexer home
IPSS
position sensor
SJOD Sorter joint sensor
Sorter upper
STCD
cabinet sensor
Sorter front
SBCD
cabinet sensor
When the sub code is entered, the LCD shows the following
display.
With the RPL on, enter the sorter load code to be checked,
and the code will be displayed on the copy quantity display.
Press the START key to start checking of the selected load.
[When the sorter is installed]
SIMULATION NO. 3-3
SORTER
1. MAIN MOTOR.
2..FAN MOTOR.
3..GATE SOLENOID.
4..INDEX MOTOR.
Code Display
MAIN MOTOR
1
FAN MOTOR
2
3 GATE SOLENOID
4 INDEX MOTOR
[When the staple sorter is installed]
SIMULATION NO. 3-3
SORTER
1. MAIN MOTOR.
2..PAPER PASS SOLENOID.
3..PAPER HOLD SOLENOID.
4..BINSHIFT MOTOR.
5..JOGGER MOTOR.
6..STAPLE MOTOR.
9 – 5
Staple sorter (SF-S53)
Display Name
JSW Sorter set sensor
Indexer (pin)
BHPS
home position
sensor
Indexer (pin)
LCHPS home position
sensor
Indexer (pin)
SGHPS
home position
sensor
Paper entry
SPID
sensor
Paper entry
SPPD
sensor
BPED Bin paper sensor
Staple cover
SCSW
open/close sensor
Staple operation
SHPS home position
sensor
Staple unit home
SCS
position sensor
Staple unit
SSD
position sensor
SED Staple sensor
Staple position
SPED
sensor
Content
Sorter main motor operation
check
Sorter fan motor operation
check
Sorter gate solenolid
Sorter index motor
Adjustment value
Ref. page
Adjustment
Default
scope
— — —