Table of Contents
Advertisement
Main
Sub
Item
code
code
2
Error (trouble)
counter clear
3
Duplex counter
clear
4
RADF counter clear
Contents
3. MACHINE/RADF JAM COUNTER CLEAR
When "3. BOTH" is selected in the jam counter selection
screen and the START key is pressed, the LCD shows the
following display.
When "1. YES" is selected in the display and the START key is
pressed, the machine and the RADF jam counters are cleared
and the LCD returns to the sub code input screen of Sim 24.
When "2. NO" is selected and the START key is pressed, the
counters are not cleared and the LCD returns to the sub code
input screen of Sim. 24.
SIMULATION NO. 24-1
MACHINE/RADF JAM COUNTER CLEAR.
ARE YOU SURE ?
1. YES
When the sub code is entered, the LCD shows the following
display to allow clearing of the error (trouble) counter.
SIMULATION NO. 24-2
ERROR COUNTER CLEAR.
ARE YOU SURE ?
1. YES
2. NO
When "1. YES" is selected in the display and the START key is
pressed, the error (trouble) counter is cleared and the LCD
returns to the sub code input screen of Sim 24.
When "2. NO" is selected and the START key is pressed, the
counter is not cleared and the LCD returns to the sub code
input screen of Sim. 24.
When the sub code is entered, the LCD shows the following
display to allow clearing of the duplex counter.
SIMULATION NO. 24-3
DUPLEX COUNTER CLEAR.
ARE YOU SURE ?
1. YES
2. NO
When "1. YES" is selected in the display and the START key is
pressed, the duplex counter is cleared and the LCD returns to
the sub code input screen of Sim 24.
When "2. NO" is selected and the START key is pressed, the
counter is not cleared and the LCD returns to the sub code
input screen of Sim. 24.
When the sub code is entered, the LCD shows the following
display to allow clearing of the RADF counter.
SIMULATION NO. 24-4
RADF COUNTER CLEAR.
ARE YOU SURE ?
1. YES
2. NO
When "1. YES" is selected in the display and the START key is
pressed, the RADF counter is cleared and the LCD returns to
the sub code input screen of Sim 24.
When "2. NO" is selected and the START key is pressed, the
counter is not cleared and the LCD returns to the sub code
input screen of Sim. 24.
9 – 18
2. NO
Adjustment value
Ref. page
Adjustment
Default
scope
—
—
—
—
—
—
—
—
—
Advertisement
Table of Contents
