Table of Contents
Advertisement
F
Remove the screw which fixing the thermistor, and remove the
screws and connector of the holder which is fixing the harness,
and remove the thermistor.
G
Remove the harness and two screws, and remove the thermostat.
H
Tighten the two blue nuts to release the heat roller pressure.
I
Remove two screws (blue), and separate the upper heat roller
section and the lower heat roller section from each other.
J
Remove the upper heat roller unit.
K
Remove the lower heat roller unit.
L
Remove two screws, and slide and remove the lower fusing
cover.
7 – 5
Advertisement
Table of Contents
